A-Type or H-Type: What Changes the Quote Key points An A-type layer cage steps out. Manure often drops to a pit or one scraper under the row. An H-type layer cage stacks straight. Each tier takes its own manure belt and its own egg belt. The choice is house height, manure method, and whether eggs […]
Egg Collection Belt: Cage or Nest Key points An egg collection belt takes the egg off the roll and out of the house. Cage and nest use different belts. An H-type layer row has a belt on the front of each tier. A cross conveyor or a table gathers the tiers at one end. An
Cooling Pads Sized to the Fans Key points A cooling pad is the inlet of a tunnel house. Area follows fan capacity, not house length. A 150 mm pad is commonly sized at about 1.8 m/s through the face. A 100 mm pad takes a lower speed. Too little pad raises pressure. The fans then
Nipple Lines and Pan Feeders in a Poultry House Key points A nipple drinker line and a pan or chain feeder are laid as pairs. Birds should not walk more than about 3 m to water. A working guide is 8 to 12 birds a nipple on broilers, tighter on breeders. Nipples sit no more
Plastic Slat Floor in a Poultry House Key points A plastic slat floor is the raised surface in a floor house. Birds stand on it. Manure falls through. Breeders and floor layers usually take a slat band under the nests, with litter beside it. Full slat is the other layout. The board is polypropylene. Support
Manure Belt on an H-Type Layer Cage Key points A manure belt sits under each tier of an H-type layer cage. Droppings land on it and leave at the row end. The belt is polypropylene, commonly 1.0 mm up to about 100 m of row, 1.2 mm on a longer or wetter row. An A-type
Nest Boxes for a Floor House: One Row or Two Key points A nest box in a floor house is a community unit, not one hole per hen. Count sets from birds and from house length. Automatic: one centre row, egg belt to one end. About 160 birds a set. An 8,000-bird house takes about
Poultry House Controller: Fans, Pads and the Sprinkler Call Key points The poultry house controller reads temperature and humidity. The power box beside it switches the fans, the pad pump and the sprinkler. Pads cool the air coming in and raise house humidity. A sprinkler wets the bird. The two calls are not the same
Poultry House Controller: Fans, Pads and the Sprinkler Call Read More »
Feed Silo at the House: Cone, Boot and the Line Leaving It Key points The tower is only useful once feed leaves the cone into the line. Hopper angle on a pellet tower is usually 55–60°. Below 45° the cone holds feed. Bolts inside the cone are round-head, so nothing hangs on a thread. 75,
Feed Silo at the House: Cone, Boot and the Line Leaving It Read More »
Poultry Feed Silo: Size the Heavy Week, Then Fill It Key points A poultry feed silo beside the house is sized on 5–7 days of feed, using the heavy week, not a year’s ration. Orders cluster at 3, 5, 8, 10, 15, 20, 25 and 30 tonnes. Height and diameter follow the factory drawing. Two
Poultry Feed Silo: Size the Heavy Week, Then Fill It Read More »